UltraStream Benchtop

Yes, the UltraStream is vegan, the fluoride reduction media in the UltraStream is not bone char.

The molecular hydrogen (H2) is generated by a reaction between the elemental magnesium of the O-Dobi media and water. H2 is being generated while the UltraStream is at rest, and accumulating to its maximum even before you pour a glass. This means that the water (approx.250ml) inside the UltraStream is hydrogen enriched and just waiting for you to pour. As new water enters the UltraStream the process of enrichment begins again. We’ve measured output of up to 1.2ppm, but we have to say that it always depends on the suitability of your source water, so we can’t promise a particular number. We have found that softer (more acidic) waters generate more H2 than more alkaline input waters. H2 production will slowly reduce over the life of your filter as calcium accretes on the O-Dobi media. That’s one reason we use KDF media. As well as removing heavy metals and neutralising bacteria, KDF also neutralises excess hardness in input water – before the water reaches the O-Dobi bead media.

The special magnesium O-Dobi beads react with two water molecules to produces magnesium hydroxide and hydrogen gas. Mg ＋ 2H2O → Mg(OH)2 ＋ H2 The Hydrogen gas isn’t very water soluble so it’s a good idea to drink the water quick to get the maximum amount of molecular hydrogen. KEY Mg = Magnesium Metal H2O = Water Mg(OH)2 = Magnesium Hydroxide (often called Milk of Magnesia) H2 = Molecular Hydrogen (Hydrogen Gas) H = Atomic Hydrogen (Active Hydrogen)

The warranty for the UltraStream is 3 years (Conditions Apply) for parts and labour under normal use. Warranty does NOT cover filters as there are too many variables in the source water.

An UltraStream filter will last 12 months – depending, as always, on source water conditions and use. Our 12-month recommendation is based on a family of 4, who use about 2.1 gallons (8 litres) per day (8 glasses) for drinking and cooking. If you use less, your filter may last longer. More – and you’ll need to replace sooner. Filter life always depends on the quality of the input water. The more unwanted stuff in the water, the harder the UltraStream has to work. For the vast majority of users, 12 months of protection and performance is no problem. When the filter is replaced (a simple 3-minute job) your UltraStream returns to full filtration, pH, hydrogen and antioxidant power.

Unlike electric water ionizers, the UltraStream’s filter cartridge actually contains the media that ionizes, alkalizes and infuses the water with molecular hydrogen. So when you change a filter, you get the brand new version, which will incorporate any updated technology we have implemented. That’s why we call it an ‘eternal’ system.

People want to remove Chlorine and Fluoride from their drinking water. People want great tasting water. The UltraStream is easy to install, to operate and to replace its filter. It helps people feel better, perform better and enjoy a healthier life. It is affordable, benchtop costing 76 cents/gallon for the first year and then down to 31 cents/gallon on your 12 month filter change (benchtop version).

No, the UltraStream benchtop and undersink filters do not require any electricity or power supply.

The battery pack – has four AA 1.5v batteries, they last for up to a year. Newer models are supplied with a USB cable for an alternative connection via a USB adaptor.

The UltraStream vented faucet isn’t like a normal water filter faucet. So DO NOT install an UltraStream a normal tap/faucet. The vented faucet is used because it takes mains pressure away from the undersink UltraStream. There are too many stories we hear of people’s flooded kitchens when they have bought eBay UltraStreams and installed then under the sink without a vented faucet. Only to find that they could not withstand mains pressure.

Quick connect fittings are a simple method of attaching hoses, they have the capacity of withstanding mains pressure. To make a connection the tube is simply pushed in (hard) by hand. The unique patented collet locking system then holds the tube firmly in place without deforming it or restricting flow. To remove it, push the collet around the hose in as you pull the hose out.

The easiest way to find out the size of the thread in your mixer tap/faucet is to remove the aerator (this is the part that screws off at the end of your tap) and measure the diameter (across the centre) of the thread. Take a clear photo with an accurate measurement of your aerator diameter as shown in the picture below, then call us on 1800 268 469 or email the photo to info@alkaway.com.au and we will find the right adaptor for you.

In our design of the UltraStream, we wanted to, where possible, reduce the waste of materials. We really wanted the stainless steel (SS) sleeve for strength and cleanliness but didn’t want to throw it away with each filter change, so we had our engineers create a removable reusable sleeve. When you change over to a new filter, (new replacement filters are supplied without a SS sleeve) you will need to put the old filter sleeve onto the new filter. Removing the stainless steel sleeve video

The blue tap under the UltraStream is where we connect the inlet hose. The tap also controls the flow into the UltraStream, which, in turn, affects the output alkalinity of the water. When you install your UltraStream, adjust the tap until you have around 2 liters of water output per minute.

The easiest way to find out the size of the thread in your mixer tap/faucet is to remove the aerator (this is the part that screws off at the end of your tap) and measure the diameter (across the centre) of the thread. Take a clear photo with an accurate measurement of your aerator diameter as shown in the picture below, then call us on 1800 268 469 or email the photo to info@alkaway.com.au and we will find the right adaptor for you.

Yes in 95% of cases Attaching your UltraStream to your kitchen faucet is, in 95% of cases, easy. The flow diverter and adaptors are designed to fit taps with male and female threads with a diameter of 21 – 23 mm. Four adaptors are included with every new benchtop UltraStream to connect the flow diverter to different sized taps. This is how easy it is… 1. Remove the existing aerator from your tap. 2. Check if the flow divertor screws on. If so great. If not… 2. Select the adaptor ring that fits. 3. Attach the adaptor ring to the supplied flow diverter 4. Screw the adaptor ring and flow diverter assembly to your tap. Benchtop Installation Video – https://youtu.be/i3yuEegEfRA If your flow diverter is leaking only a small amount, you can try applying Teflon tape to the thread of the adaptor ring. If none of the provided adaptor rings fit your tap, then we do have the following solutions: 1. We have some specially sized adaptors. 2. To help us find the right adaptor for you, we need to see a photo with an accurate measurement of your tap or aerator (this is the part that screws off from the end of your kitchen tap). 3. A Jubilee Fitting (see photo) is a rubber fitting that can go over your faucet and secured to the tap with a metal clamp. 4. You could change your kitchen tap or install it to your bathroom or laundry tap. 5. Another option is to install the UltraStream under the sink using our UltraStream Undersink Kit.

Yes, unlike electric water ionizers, the UltraStream will also work well with a water softener. Softened water isn’t something you want to drink or cook with, so the UltraStream is a great solution for consumption when you need to maintain soft water for appliance life and showering.

It is a selective antioxidant. It targets and neutralizes the harmful, cytotoxic free radicals, such as hydroxyl radicals. Scientific studies have concluded that Hydrogen may help and prevent a range of diseases and acts as an inflammatory.

The highest Hydrogen level is with your first glass in the morning.

No. It will reduce over the life of the filter. This is related: a) to the suitability of your water in terms of Total Dissolved Solids (TDS) and pH b) the intervals between uses. Ideally you should attempt to get a glass of water, wait up to an hour, then repeat. This aligns with most people’s drinking habits and give the elemental magnesium time to regenerate more Hydrogen.

Yes. But let’s be honest here. Our Reggie (Son’s dog) is as finicky about what he eats and drinks as some teenagers we know. He still prefers the water from the saucer under our Peace lily plant. Cats are just as headstrong. That being said, over the years we have had many heart-warming stories about how the water saved old dogs from pain and suffering.

Everyone has a different reaction to UltraStream water. It is not just ultra-pure, it is also mineralised, alkaline, energised and rich in molecular hydrogen. Your body will acknowledge that there’s something happening in its hydration effect. We’ve seen many reactions, immediate pain relief, greater urination, energy surges, a thirst for more, the feeling of silken water, detox symptoms and more. It’s good to take a note of them so you can see how the symptoms play out longer term. An important point to keep in mind is that the most powerful water from your UltraStream will be the first glass in the morning. If you pour more than one glass, the Hydrogen effect will lessen.

Our independent laboratory tests used a water sample that was a ‘witches brew’ of pesticides, volatile organics, fluoride, chlorine, heavy metals, and minerals. The UltraStream changed an input pH of 7 to an output pH 9 in these tests. We’ve pushed the laboratory much farther than the normal laboratory tests by asking for performance statistics beyond the normal lifespan of the filter. Most water filter tests are taken from the first water out of the filter. Most do not test for a possible reduction in performance as the filter is continued in service. Preview the UltraStream Test results UltraStream’s pH performance is directly related to the input water. Tap water is the only regulated water in the US and is around pH 7.0 for most homes. The UltraStream performs wonderfully in this environment and will consistently produce water ranging from pH 8.0 – 9.0. Most commonly, the water starts at pH 9.0 at installation, and by the time the filter needs to be replaced, it measures closer to pH 8.0. The bottom line: more acidic input water will have a lower pH, more alkaline input water will have a higher pH but both may be adjusted using the flow control at the bottom of the UltraStream. There are a couple of other advantages as well. In hard water with excessive levels of alkaline minerals (like an overabundance of calcium), the UltraStream uses a special patented media that alters the form of the calcium and prevents it from clogging the filter. It also re-infuses input water with healthier levels and proportions of alkaline minerals, as well as ionizing the water. We’ve used our two decades of water filter experience to ensure this lasts the life of the filter, so you have excellent purity and performance from start to finish. Those who utilize well water should also expect great performance. Very often, well water starts a bit above 7.0 and this can also translate to higher pH outputs from the UltraStream as well. A sediment pre-filter will likely be required for well water.

We suggest waiting at least 30 minutes before or after eating a large meal. Alkaline water has the potential to reduce the efficacy of your gastric acid. (Although some Italians drink alkaline water with every meal…)

Yes, you can drink UltraStream water as you would drink regular tap water. We have observed that the amount of water people can drink once they install their UltraStream will increase because it seems to not bloat people as many ordinary tap waters do. We aim for x8 250ml glasses per day. Try to drink it as close to the moment it leaves the UltraStream for maximum molecular hydrogen.

Yes. Through lengthy research and development, the UltraStream uses the world’s best refined activated alumina media. Removing 78% of Fluoride throughout the life of the filter (792.5 Gallons – 3000L). Preview the results from the laboratory test report. Up to 95% of Fluoride can be removed when the UltraStream is installed with an additional Fluoride Pre-filter.

Through lengthy research and development, the UltraStream uses the world’s best refined activated alumina media. Removing 78% of Fluoride throughout the life of the filter (792.5 gallons – 3000L). Preview the results from the laboratory test report. Up to 95% of Fluoride can be removed when the UltraStream is installed with an additional Fluoride Pre-filter.

Yes. Our latest version, the Mk V, has integrated Virus Guardian technology which has NSF approval for up to 99% removal of viruses, bacteria and cysts.

Heavy metals including mercury, lead, aluminum and copper, as well as bacteria, pesticides, algae and fungi. For more details, Preview the laboratory test report.