UltraStream Benchtop – Hydrogen Rich Alkaline Water Filter​

This depends on a number of variables. But as a general guide… for medium weight people is to drink about 1/3 of your body weight in ounces a day. So if you weigh 150 lbs (68 kgs), you should drink roughly 50 fluid oz (1.47 Litres) of water. If you work out, if it’s hot and you’re sweating more, if you fly, if you have a soda/coffee/tea, then you can choose to drink more. All of those things speed up the elimination of water and therefore, we need more.

Everyone has a different reaction to UltraStream water. It is not just ultra-pure, it is also mineralised, alkaline, energised and rich in molecular hydrogen. Your body will acknowledge that there’s something happening in its hydration effect.
We’ve seen many reactions, immediate pain relief, greater urination, energy surges, a thirst for more, the feeling of silken water, detox symptoms and more. It’s good to take a note of them so you can see how the symptoms play out longer term.
An important point to keep in mind is that the most powerful water from your UltraStream will be the first glass in the morning. If you pour more than one glass, the Hydrogen effect will lessen.

Our independent laboratory tests used a water sample that was a ‘witches brew’ of pesticides, volatile organics, fluoride, chlorine, heavy metals, and minerals. The UltraStream changed an input pH of 7 to an output pH 9 in these tests. We’ve pushed the laboratory much farther than the normal laboratory tests by asking for performance statistics beyond the normal lifespan of the filter. Most water filter tests are taken from the first water out of the filter. Most do not test for a possible reduction in performance as the filter is continued in service.

Preview the UltraStream Test results

UltraStream’s pH performance is directly related to the input water. Tap water is the only regulated water in the US and is around pH 7.0 for most homes. The UltraStream performs wonderfully in this environment and will consistently produce water ranging from pH 8.0 – 9.0. Most commonly, the water starts at pH 9.0 at installation, and by the time the filter needs to be replaced, it measures closer to pH 8.0. The bottom line: more acidic input water will have a lower pH, more alkaline input water will have a higher pH but both may be adjusted using the flow control at the bottom of the UltraStream.

There are a couple of other advantages as well. In hard water with excessive levels of alkaline minerals (like an overabundance of calcium), the UltraStream uses a special patented media that alters the form of the calcium and prevents it from clogging the filter. It also re-infuses input water with healthier levels and proportions of alkaline minerals, as well as ionizing the water.
We’ve used our two decades of water filter experience to ensure this lasts the life of the filter, so you have excellent purity and performance from start to finish.

Those who utilize well water should also expect great performance. Very often, well water starts a bit above 7.0 and this can also translate to higher pH outputs from the UltraStream as well. A sediment pre-filter will likely be required for well water.

We suggest waiting at least 30 minutes before or after eating a large meal.

Alkaline water has the potential to reduce the efficacy of your gastric acid.

(Although some Italians drink alkaline water with every meal…)

Yes, you can drink UltraStream water as you would drink regular tap water.
We have observed that the amount of water people can drink once they install their UltraStream will increase because it seems to not bloat people as many ordinary tap waters do. We aim for x8 250ml glasses per day.

Try to drink it as close to the moment it leaves the UltraStream for maximum molecular hydrogen.