UltraStream Undersink Kit with Faucet
1 x Vented Faucet/tap (with 3 tubes)
1 x Spout
1 x Cold-water connector (Angle Stop Valve)
1 x John Guest spanner
1 x John Guest size converter (1/4″ Stem adaptor)
1 x Pressure Limiting Valve (PLV)
1 x UltraStream Undersink Installation Instructions
1 x Hole template
The UltraStream Undersink must be installed with a vented faucet, otherwise, any and all warranty or warranty claims are void.
What you will need;
Apply masking tape over the area to put the hole. Use an electric drill with a metal hole saw bit to drill a 1′ or 1 ¼” hole. Remove all sharp edges before assembling the Faucet. We recommend contacting a stone bench expert for drilling a hole in stone benches. See separate full instructions.
Only logged in customers who have purchased this product may leave a review.